If you regularly return to the same wire twisting jobs, entering the same settings for every order adds work to your setup. You need a machine that lets you keep those settings, adjust the process when the wire changes, and give operators clear control over each sequence.

Our ET-12 automatic wire twisting machine brings these controls together: adjustable spindle speed, programmable process segments, selectable soft starts and stored settings. We recommend it for buyers who want more control over recurring twisting operations, particularly when different stages need different speeds or rotation directions.

If you are looking for a copper wire twisting machine, these are the ET-12 features worth considering alongside your wire construction and finished-part requirements.

Sedeke ET-12 Wire Twisting Solution

Bring back repeat jobs without re-entering every setting

The ET-12 stores programmed values for reuse. When a recurring order returns, your operator can work from the saved settings instead of entering the same parameters again.

This is useful when your production schedule moves between established jobs. Keep the relevant settings with each job so operators have a defined starting point for the next batch. The benefit is practical: less repeated parameter entry during setup.

Match the speed to each stage of your process

You can adjust the ET-12 spindle speed continuously from 200 to 5,500 rpm. That range gives you room to select a working speed for the wire and sequence you are running.

You can also assign different speeds to individual process segments. Where a job calls for a slower stage followed by a faster stage, you can put those settings into the sequence rather than use one speed throughout. Rotation direction is programmable by segment too, with forward and reverse counting available.

For your purchasing decision, this means you can look beyond the maximum rpm figure. The ET-12 gives you control over how the sequence runs, not just how fast the spindle can turn.

Use a gentler start for fine-wire processing

An abrupt start can put unwanted tension on fine wire. The ET-12 offers soft-start modes from 0 to 9, selectable separately for each segment, to make the start more gradual and limit starting tension.

If startup is a sensitive part of your process, this is a useful reason to choose a machine with adjustable starting behavior. You can select the start mode along with the speed and turn count for the actual wire, rather than treat startup as a fixed part of the cycle.

Keep settings easy to view and adjust

The backlit LCD gives your operators a clear interface for viewing and changing settings. Together with parameter storage, it supports the everyday work of setting up a job, making adjustments and returning to an established sequence.

These controls matter most when you use them regularly. If you switch between repeat orders, work with fine wire, or need different rotation settings within a sequence, the ET-12 is worth putting on your shortlist.

Which ET-12 features matter for your production?

Your production needET-12 featurePractical value
Repeat orders with established settingsStored programmed valuesReuse settings with less repeated entry
Different speeds within one sequenceSpeed control by segmentSet the speed for each stage
Direction changes in the processDirection control by segmentProgram the required rotation sequence
A more gradual start for fine wireSelectable soft-start modesLimit starting tension
Clear access to operating settingsBacklit LCDView and adjust parameters at the machine

Choosing an ET-12 for a specified copper wire twist pitch

When your drawing specifies twist pitch, keep that requirement separate from turn count. Pitch is the distance along the finished wire for one complete twist; turn count is the number of rotations.

For an ET-12 inquiry, share your required pitch alongside the wire size, number of wires and finished twisted length. That gives us the information needed to discuss the configuration for your part. A drawing or clear photo is a good place to start.

Automatic twisting Machine

Frequently asked questions

Why choose the ET-12 for recurring orders?

It stores settings for reuse, reducing the need to enter the same parameters each time a job returns.

What is the ET-12 spindle speed range?

The spindle speed is continuously adjustable from 200 to 5,500 rpm.

Can I change speed and direction within a sequence?

Yes. You can set speed and rotation direction for individual process segments.

Does the ET-12 have a soft-start function?

Yes. Modes 0 to 9 provide selectable starting behavior for individual segments, including more gradual starts for fine wire.

How do I get an ET-12 price?

Send us a wire photo or drawing and your required result. Ask for an ET-12 quotation for your application.

Request your ET-12 quotation

Choose the ET-12 when saved settings and control over speed, direction and startup address the way you run your wire twisting jobs. You get practical adjustment options for repeat production without making maximum speed your only buying criterion.

Contact Sedeke for an ET-12 quotation. Share a photo or drawing of your wire part, and tell us if a specific twist pitch is required. We can discuss your application and quote the proposed configuration.