The ET-12 combines adjustable spindle speed with programmable winding segments. Operators can set the speed and rotation direction for individual segments to suit different process sequences. Stored settings support repeat jobs by reducing the need to enter the same parameters again.
For fine-wire processing, selectable soft-start modes allow a more gradual start. The appropriate speed, turn count and start mode should be established through sample trials with the actual wire.
An LCD with backlighting provides a clear interface for viewing and adjusting settings. The control system includes industrial circuit protection.
The motor drives the shaft directly, reducing the need for intermediate power transmission components.
Electronic braking replaces a mechanical brake arrangement. The drive design avoids carbon brushes and belts, reducing maintenance associated with these components.
Data protection and setting storage allow you to retain programmed values for repeat jobs.
Set the winding direction for each process segment, with forward and reverse counting available for different winding sequences.
Assign different speeds to individual segments. The system is described as providing low-noise operation and constant torque at both high and low speeds.
Choose from soft-start modes 0–9 and set them separately for each segment to limit starting tension when working with fine wire. The system also supports rapid starting and braking from high speed.
| Parameter | Value |
| Spindle speed (rev/min) | 200-5500 continuously adjustable |
| Power supply | AC220V,AC110V |
| Maximum winding wire diameter | 1.2mm |
| Number of twisted coils | 0.5~9999.9 circles |
| Data storage | 99 pieces |
| Maximum winding process | 20 Segments |
| Maximum output | 9999 |
